DSF型 電液動三通分料器

    DSF-A(B、C、D、E)型 電液動三通分料器采用了電液推杆作動力源。因其具有自動過載保護性能,當運行受阻時,油路中壓力增高到調定的限額,溢流閥迅速而準确地溢流,實行過載保護。電機運轉在額定值内不會燒毀。當推杆運行至調定行程終端時,電液推杆油路集成塊中設計了自鎖機構,電機停止,活塞杆則自鎖在此位置上,處于保壓狀态。
    DSF - (A, B, C, D, E) three reduction to common denomiator type electric hydraulic device uses electric hydraulic draw stem as a power source.Because of its automatic overload protection performance, when run up, increases pressure in the oil to the setting of limits, the overflow, overflow valve quickly and accurately for overload protection.The motor operates within the rating will not burn.When push rod run to the set itinerary terminal, electric hydraulic draw stem hydraulic integrated block design the self-locking mechanism, motor stops, the piston rod is latching position on this, in the state of pressure keeping.
   The DSF - A (B) three reduction to common denomiator type electric hydraulic device can be used for material reversing/shunt.And allow the obsolete material circulation commutation;DSF - C (D and E) type electric hydraulic SanNeng distributor plastic can be used for reversing, and has the function of the gate;At the same time control the material to cut off or the role of circulation at the same time.Working principle is through the electric hydraulic draw stem drive SanNeng the distributor rotor institutions, to control turning, turning, reach the role of material commutation.This product can be directly to the upper flange joint under tape sports a funnel or other equipment, material interface, its are commonly used in bulk density less than or equal to 2.8 t/m3 and grinding cut larger, under the condition of poor working conditions.Considering the structure size, weight, big (wearing plate thicker), the upper flange can't bear its weight, use must be according to actual circumstances, plus support.
适用介質 含塵固體顆粒或粉料 電源電壓 380V50HZ
适用溫度 ≤350℃ 調節特性 常規情況二位開關式
電液推杆型号 DYT系列 特殊情況4-20m A電信号

  • 官方微信